3.5mm Gold Plated Connectors w/shrink tube - 6 pair

SIX PAIR of 3.5 mm Gold Plated Bullet Connectors. Shrink tube included!

These 3.5 mm connectors are a solder type connector that are widely used in the RC hobby. They are by far the most popular connector for motors like the 2408-21, 2410-12D, 2410-08Y, 2410-09Y, 2826-10, 2826-19, 2830-09, 2830-10, 2836-09, 2836-11, 3530-10,3530-14, 3536-10, 3542-10, 3548-08, 3548-10 and 4248-06.

Brushless motors have three wires to connect to the Electronic Speed Control (ESC), so there are enough connectors included for TWO Motor/ESC connections.

Here's a tip for soldering these connectors:

Drill three 3/16 inch holes about 1/4 inch deep and 1/2 inch apart in a small board. Insert a 3.5mm connector in each hole, with the end to be soldered upright. Heat a connector with a soldering iron and melt a little solder into it, then insert the wire into the melted solder. Move the soldering iron away from the connector and hold the wire in place until the solder solidifies. Works like a charm, and you don't need three hands!