Plastic Mounting Stick with 1.5 inch base plate

This Motor Mounting Stick is 10mm square by 3 inches long, with 1.5 inch diameter base plate. It is useful for mounting motors by attaching the stick to your model using screws or glue. 

Motors can be attached to this Mounting Stick in 3 different ways:

1. The firewall mount of the motor can be attached to the base plate of the Mounting Stick.

2. A 10mm stick mount can be attached to the Mounting Stick as pictured below (1 & 2).
Here is a link to our 10mm stick mounts:  Stick Motor Mounts for motors with 6mm, 8mm and 11mm bearing tubes 

3. The Mounting Stick can accommodate a motor with an 8mm bearing tube. Please see photo (3) below for illustration of a 2712-12 motor mounted on the stick. Other motors with 8mm bearing tubes that will fit directly on the Mounting Stick include the 2712-17, 2712-30, 2408-21, 2410-12D, 2410-08Y,  and 2410-09Y.
Although the Mounting Stick has a clamp to secure the motor, we recommend using an adhesive to help retain the motor in the stick.

The pictures are for reference only. The 10mm Stick Motor Mounts and motors must be purchased separately.