This is a good all-purpose 3-cell Lipo, and a nice size battery for small to medium size Parkflyers and 3D profile planes. This battery is a great choice for the GWS Slow Stick when matched with the 2410-09Y brushless motor and the GWS EP1047 prop.
11.1v 1300 30C Lipo Specifications:
Dimensions: 3.0 x .1.3 x 0.8 inches
Weight: 3.8 ounces (108 grams)
Output: 39.0 amps continuous, 78.0 amps burst
Charge rate: Maximum 1C (1.3 amps).
Connectors: A T-Plug connector is installed. The balance connector is the JST XH series 4 pin with 2.5mm pin spacing. This balance connector is also used on 3E Model, Align, BatteryHobby, Common Sense RC version 2, DualSky, Dynam, Electric Power, Esky, Fully Max, GE Power, Great Planes Electrify, Hextronic, HiModel, Hobby Loong, Horizon E-flite, Imax, Mega Power, Mystery, Parkzone, Protek, Rhino, RadicalRC, Turborix, Turnigy, Vampower, Venom, Walkera, X-Caliber, and Zippy Lipos. This list is subject to revision, and we do not guaranty it's accuracy. If you find an error on this list, please contact us.
Please visit the Heads Up RC LiPo Battery Guide for help in choosing the correct Lipo battery for your model.
Please read and observe all safety precautions provided with this battery before using or charging. This battery must only be charged with a battery charger designed for Lithium Polymer batteries.This Lipo battery must not be charged at a rate greater than 1C (1.3 amps). Always charge LiPo batteries on a fireproff surface, and never leave unattended while charging.
Lithium Polymer batteries hold a large amount of energy and must be respected. Discharging or charging at an improper rate will cause excessive heat which can damage the battery, or even cause a fire! Your use of this product means that you accept full responsibility for any consequences.
e-Gift Cards
Wish List
